5.00/
DESCRIPTION
ELI-S-20
APPLICATION
The Philips Bodine ELI-S-20 Emergency Lighting Inverter works in conjunction with a fluorescent or LED fixture to create an emergency lighting system. The ELI-S-20 operates a maximum load of 20 or 25 W at unity power factor. It allows the connected fixture(s) to be on, off, switched or dimmed without affecting emergency operation. Each unit consists of a high-temperature nickel-cadmium battery, charger and electronic circuitry in one steel case. The ELI-S-20 provides power to the input side of the fixture, including the ballast, and can be used with indoor or outdoor emergency fixture applications.
OPERATION
Upon failure of normal power, the ELI-S-20 instantly begins providing emergency power to the connected lighting load for a minimum of 90 minutes. A solid-state low voltage disconnect circuit protects the inverter battery from severe damage by deep discharge during prolonged power failures. When normal power is restored, the ELI-S-20 automatically returns to charge mode. The battery capacity is fully restored in 24 hours.
INSTALLATION
The ELI-S-20 does not affect normal fixture operation and may be used with a switched or unswitched fixture. It can be installed in close proximity to the fixture or remote from the fixture (up to 250 feet).
The Philips Bodine ELI-S-20 Emergency Lighting Inverter works in conjunction with a fluorescent or LED fixture to create an emergency lighting system. The ELI-S-20 operates a maximum load of 20 or 25 W at unity power factor. It allows the connected fixture(s) to be on, off, switched or dimmed without affecting emergency operation. Each unit consists of a high-temperature nickel-cadmium battery, charger and electronic circuitry in one steel case. The ELI-S-20 provides power to the input side of the fixture, including the ballast, and can be used with indoor or outdoor emergency fixture applications.
OPERATION
Upon failure of normal power, the ELI-S-20 instantly begins providing emergency power to the connected lighting load for a minimum of 90 minutes. A solid-state low voltage disconnect circuit protects the inverter battery from severe damage by deep discharge during prolonged power failures. When normal power is restored, the ELI-S-20 automatically returns to charge mode. The battery capacity is fully restored in 24 hours.
INSTALLATION
The ELI-S-20 does not affect normal fixture operation and may be used with a switched or unswitched fixture. It can be installed in close proximity to the fixture or remote from the fixture (up to 250 feet).