Battery Backup - Remove
Nickel–Metal Hydride (NiMH) - Remove
Architectural - Remove
New York Approved - Remove

Clear all filters

Battery Backup Combo Unit Nickel–Metal Hydride (NiMH) Architectural New York Approved Battery Backup

Battery Finder

Sealed Lead Acid Battery

Voltage:
Amps:
Terminal:
View Terminals Types
NiCAD Battery

Voltage:
Cell Type:
Configuration:
Configuration and Size Chart
Lithium Iron Phosphate Battery

Voltage:
Amps:
Terminal:
View Terminals Types

Results: 77
1 2 3

Results: 77
1 2 3

Battery Backup

Products with battery backup contain a battery so in the case of a power outage the lights or signs with stay illuminated for roughly 90 minutes.

Combo Unit

These exit signs are also equipped with additional emergency lighting. Check out all of our LED Combo Unit Exit Signs

New York Approved

New York City requires that any exit signs and emergency lights:
  • Meets New York City Electrical Code (meets UL certification)
  • NFPA & OSHA require initial illumination of 1 foot-candle and a minimum at any point of 0.1 foot-candle. New York City emergency lighting requires TWICE that (an average of 2 foot-candle or 22 lux and a minimum at any point of 0.2 foot-candle or 2.15 lux measured along the path of egress at floor level). This is why The Exit Light Company recommend emergency lights with nine (9) watts on each head. Since even with the requirement for brighter lighting, the minimum standard of 90 minutes of run-time on battery backup power is in effect, NYC Code approved emergency lights are heavy-duty units with larger batteries.
  • The letters of exit signs and exit sign/emergency light combos are mandated to be red.
  • The height of letters shall be not less than 6 inches (152 mm), except that in Group A (theaters and concert halls) and Group R-1 (Shelters, Fraternity & Sorority Houses) occupancies letters shall be not less than 8 inches (203 mm) high. A change from previous years, now U.S. standard 6" exit signs are acceptable in most locations, but certain locales still require 8" exit signs.
  • All signs shall be of metal or other durable materials.
  • All high-rise buildings require photoluminescent exit path markings for egress routes.

Architectural

Architectural

Nickel–Metal Hydride (NiMH)

NiMH batteries can have two to three times the capacity of an equivalent size NiCd, and their energy density approaches that of a lithium-ion cell. Nickel–Metal Hydride batteries are good for high current drain applications because of their low internal resistance.
 
The disadvantage of NiMH batteries is their high rate of self-discharge. NiMH batteries typically lose 4% of their charge per day of storage. LSD NiMH batteries significantly lower self-discharge, but at the cost of lowering capacity by about 20%.