AFO Die-Cast Architectural Emergency Light

Ideal for applications requiring low-profile, attractive emergency lighting with normally-off or normally-on with photocell control. Provides a minimum of 90 minutes of illumination both indoors and outdoors upon loss of AC power. Certain airborne contaminants can diminish the integrity of acrylic and/or polycarbonate. 

 

CONSTRUCTION

Compact, low-profile, architectural design with die-cast aluminum housing. Finishes are texturized powder coat paint for white and dark bronze. Test switch and indicator light are both located on the bottom of the housing for unit and remote and is easily accessible and visible from the floor.

 

OPTICS

LEDs with life expectancy of L70 of 60,000 hours. Delivers 1275 lumens in Normal-On operation and 350 lumens in Emergency operation

 

Wide throw distribution: Outdoor wide throw distribution: 30' (3' path of egress) at a 7.5' mounting height with 1 FC Average.

 

5,000K correlated color temperature (CCT).

 

ELECTRICAL

MVOLT (120 thru 277V, 50/60hz). Current-limiting charger maximizes battery life and minimizes energy consumption to provide low operating costs. Small Battery Chargers Certified in the CA Title 20 Appliance Efficiency Database.

 

Regulated charge voltage maintains a stable charge voltage over a wide range of line voltages. Prevents over/undercharging that shortens battery life and reduces capacity. Filtered charger input minimizes charge voltage ripple and extends battery life. Photocell feature standard for normally on product to discontinue illumination during periods when ambient light is present.

 

BATTERY: Sealed, maintenance-free nickel-cadmium.

 

SELF-DIAGNOSTICS (SD OPTION): Automatic 24-hour recharge after a 90-minute discharge. Advanced electrical design provides constant light output throughout the entire discharge period. Brownout protection is automatically switched to emergency mode when supply voltage drops below approximately 80 percent nominal of 120V. AC/LVD re-set allows battery connection before AC power is applied and prevents battery damage from deep discharge.

 

Self-Diagnostics: Continuously monitors AC functionality. Standard derangement monitoring will indicate disconnected battery, charger failure and displays green flashing indicator light while in emergency mode. Single multi-chromatic LED indicator to display two-state charging, test activation and three-state self-diagnostics.

 

Self-diagnostic testing: 30 seconds every 30 days and 90 minutes annually. Diagnostic evaluation of lamps, AC to DC transfer, battery charging and condition of microprocessor. Manual testing: Test switch provides manual activation of 30-second/30-minute/90-minute diagnostic testing for on-demand visual inspection.

 

INSTALLATION

Wall mount: typically meets 7.5' to 14' mounting height from ground or floor. Power supplied by either mounting directly to a 4" square or 4" octagon j-box (wall mount) and accepts rigid or flex conduit.

 

LISTINGS

UL wet location listed standard at 32-122°F (0-50°C). Unit with CW (cold weather) listed for -22°F to 122°F (-30° to 50°C). Meets or exceeds all applicable requirements for UL 924, NFPA 101 (current Life Safety code), NFPA 70 (NEC), California Energy Commission Title 20 section 1605.3 (W)(4), FCC Title 47, Part 15, Subpart B and OSHA.

 

WARRANTY

5-year limited warranty.