Universal 120-277V, 50/60 Hz input.
Charge/Power "ON" LED indicator light and push-to-test switch for mandated code compliance testing.
Long-life, maintenance free, rechargeable lithium iron phosphate battery.
Output short/overcurrent protection: Electronic limiting, with normal operation resuming upon removal of fault.
90-minute minimum emergency operating time over full temperature range.
Output classification: Class 2 Compliant.
Surge protection: Per C62.41 (TVS).
Input overcurrent protection: Fusible link.
24 hour maximum battery recharge time.
Works with or without an AC driver to convert new or exist-ing LED fixtures into unobtrusive emergency lighting.
Provides constant power output to the load during emergency mode operation.
Designed to operate NORMALLY-ON, NORMALLY-OFF or SWITCHED LOAD fixtures.
LED illuminated test switch.
Low-profile, slender galvanized steel housing.
Compact design allows for installation inside most linear LED fixtures.
Suitable for installation inside linear LED fixtures.
UL Listed for factory or field installation.
Suitable for damp locations (10°C - 55°C).
Five year warranty on all electronics and housing.
Meets UL924, NFPA 101 Life Safety Code, NEC, OSHA, Local and State codes.
Certified to CEC under Title 20 regulations.
5.00/
