5.00/
DESCRIPTION
Features
- Steel housing contains, battery, battery charger, transfer circuit and high frequency inverter
- Optional end caps available
- Operating temperature 68°F to 122°F (20°C to 50°C)
- Internal or external mounting to a fluorescent fixture
- One 14-50W or two 14-39W
- (2’-4’) T5 and T8 lamps with instant start or rapid start or one 4-pin
- 18-50W long compact fluorescent or one 4-pi
- 32W compact fluorescent or one 24-32W U-Bend lamp
- T5 Lamps
- Long Compact Lamps
- 4-Pin Compact Fluorescent Lamps
- (1) Lamp 440-750 Lumens
- (2) Lamps 400-690 Lumens
- Can be wired to operate switched, un-switched or normally off fixtures without affecting normal operation
- Will cold start and illuminate lamps
- Fully Automatic solid state charger
- High capacity, automatic, dust-tight instantaneous transfer relay
- Low voltage disconnect prevents over discharge of battery
- Automatic brownout protection
- Battery connector prevents battery discharge during installation
- Red charger monitor LED indicates charging of the battery and AC present
- Momentary test switch allows for quick operational check of entire system
- Nickel-Cadmium battery
- Provides 90 minutes of emergency operation
- Dual voltage 120/277VAC, 60Hz, 3.7W
- UL924 Listed
- Damp location listed
- 3-year limited warranty