Faze 180 Concealed Emergency Light

DESCRIPTION

• ETL Listed to UL924 Standard
• NFPA 101 (Life Safety Code)
• NFPA 70 (National Electric Code)

• Dual Voltage 120/277 VAC
• Selectable Input

• The unit back box is constructed of code gauge cold rolled galvanized steel.
• The back box requires an 8-1/4" long x 7-7/8" wide cutout.
• Back box is universal to accommodate ceiling or wall mount applications.
• The trim plate and door assembly are constructed of die-cast aluminum.

• Ceiling or wall mounting in new construction.
• Easy installation via the single enclosure back box.
• Units in smaller backbox have built-in grid clips for use in T-grid ceilings.
• The FAZE180 unit is mounted in a wall or ceiling and the door is closed under normal power conditions. 
  

• Fully adjustable MR16 halogen lamps with GU-10 bi-pin twist-lock base and are available in choice of 12W, 20W, 35W, 50W and 75W.
• Lamps have expected life of 2000-plus hours.

• Choice of 12V maintenance free sealed lead calcium battery with a service life of 5 to 7 years and an operating temperature range of 65°F (19°C) to 85°F (30°C) or 12V maintenance free nickel cadmium battery with a service life of 8 to 10 years and an operating temperature range of 20°F (-7°C) to 95°F (35°C).
• Both provide a minimum of 90 minutes emergency illumination.

• Select units have remote capability which can be used to power 12 volt remote lamp heads.

• Five full year warranty on units. (Lamps not included.)
• Lifetime warranty on direct drive motor.

• All units utilize a micro-processor and contain the Xtest self-test/self-diagnostic circuit.
• Each unit includes low voltage disconnect, AC lockout, and brownout protection.
• The FAZE180 unit will automatically conduct a self-test once a month to verify all systems are functioning properly.
• Several manual tests can also be initiated or cancelled at any time by pressing the test switch.
• During automatic self-test or manual test, the green AC status indicator will flash.
• Any malfunction is immediately reported via the appropriate external LED indicators.
• Upon loss of utility power, the door on the unit rotates 180° exposing two MR16 lamps which are immediately illuminated.
• When power is restored, the lamps are turned off and the door rotates back to the closed position.

• The door of the FAZE180 series is actuated by a direct drive bidirectional heavy-duty motor.
• This motor has a lifetime guarantee.

• The system charger and lamps are continually being controlled via pre-determined parameters specific to each model configuration automatically. The battery is controlled via a true open circuit test each hour after initial installation. Once each month the Xtest System illuminates lamps under load for 60 seconds behind closed door, simulating a power outage with a true charger off condition, without affecting long-term battery life. This is above and beyond the requirements of the National Electric Code and/or the National Fire Protection Association, which only requires a 30 second automatic test once every month. This gives you unequaled control and confidence, knowing you are meeting self-test code requirements each and every month.