Credit Cards Accepted
800-521-4045

Fluorescent Sealed Lead Acid (SLA) Ballasts & Drivers

Results: 4
1
ELI-S-100
Philips Bodine

ELI-S-100

$786.25
ELI-S-20 Inverter
Philips Bodine

ELI-S-20 Inverter

$318.40
ELI-S-400
Philips Bodine

ELI-S-400

$3,237.50
ELI-S-250
Philips Bodine

ELI-S-250

$1,633.55

Ballasts & Drivers

An electrical ballast or driver is a device intended to limit the amount of current in an electric circuit.
 
A familiar and widely used example is the inductive ballast used in fluorescent lamps, to limit the current through the tube, which would otherwise rise to destructive levels due to the tube's negative resistance characteristic.
 
Emergency Lighting is now selling programable LED drivers that will allow your LED lighting to be dimmable. When your driver goes out let us know the milliamps of the driver and we can program the LED to the exact milliamps.

Fluorescent

Compared to general-service incandescent lamps giving the same amount of visible light, fluorescents use one-fifth to one-third the electric power, and last eight to fifteen times longer. Fluorescents have a higher purchase price than an incandescent lamp, but can save over five times its purchase price in electricity costs over the lamp's lifetime. Fluorescent lamps contain mercury, which complicates their disposal. In many countries, governments have established recycling schemes for CFLs and glass generally.

Sealed Lead Acid (SLA)

SLA batteries are the most reliable and widely used power source. They can recharge much faster than a flooded lead acid battery, and the calcium added to their plates helps reduce water loss. Sealed lead acid batteries can recycle the gases they produce and can prevent damage to the battery when the charge rate is controlled. These batteries must always be kept in upright positions and protected from leakage.